Cisco SPA 504G Owner's Manual page 18

CFWD No Ans Number — To forward unanswered incoming call
CFWD Busy Number —To forward calls that arrive when you are already
on a call
3. Depending on your selection:
a. If you selected Always, enter a number, or extension number, to
forward all future incoming calls to.
b. If you selected No Answer, you will see that your phone number
is entered in the Contact field by default. By entering your own
phone number in this field, the phone will send callers to your
voicemail box if you do not answer. You may enter a number
to forward all unanswered incoming calls to and how many
rings to wait before forwarding (one ring is approximately four
seconds). A value of 20sec is recommended.
c. If you selected Busy, you will see that your phone number is
entered in the Contact field by default. By entering your own
phone number in this field, the phone will send callers to your
voicemail box if your phone is busy. You may enter a number
to forward all future incoming calls to when all of your incoming
lines are busy.
4. After you press cfwd soft key and enter the desired number you will see the
below idle screen.
"Calls Forwarded" Appears on the display and confirms call forwarding
is enabled.
To Disable Call Forwarding:
From the idle display, press the –cfwd soft key on the display.
The idle display returns, and the date and time are displayed.
Dynamic Forwarding
This Feature Is snot supported by the Cisco SPA504G
Enabling Do Not Disturb
18