Setting Climate Control To Automatic; Setting The Temperature; Setting The Air Distribution; Heatmatic/Air-Conditioning System - Mercedes-Benz A-Class Series Owner's Manual

Setting climate control to automatic

Only THERMOTRONIC automatic climate con-
trol features the "control climate control
automatically" function.
In automatic mode, the set temperature is
maintained automatically at a constant level.
The system automatically regulates the tem-
perature of the dispensed air, the airflow and
the air distribution.
Automatic mode will achieve optimal opera-
tion if cooling with air dehumidification is also
activated. If desired, cooling with air dehu-
midification can be deactivated.
Turn the key to position 2 in the ignition
X
lock.
Set the desired temperature.
X
To activate: press the à button.
X
The indicator lamp in the à button lights
up. Automatic air distribution and airflow
are activated.
To switch off: press the à button.
X
The indicator lamp in the à button goes
out. The airflow is regulated to the level set.
The air distribution is set to the Q posi-
tion.

Setting the temperature

Heatmatic/air-conditioning system

You can set the temperature for the entire
vehicle.
Turn the key to position 2 in the ignition
X
lock.
To increase/reduce: turn control :
X
clockwise or anti-clockwise (
( page 100). Only adjust the temperature
Y
in small increments. Start at 22 †
17 Air-conditioning system.
Operating the climate control system
THERMOTRONIC automatic climate
control
Different temperatures can be set for the
driver's and front-passenger sides.
Turn the key to position 2 in the ignition
X
lock.
To increase/reduce: press the 9
X
or : button.
Only change the temperature setting in
small increments. Start at 22 †.

Setting the air distribution

Air distribution settings
z Directs the airflow through the demis-
M Directs the airflow through the demis-
Q Directs the airflow to the entire vehicle
O Directs the airflow through the foot-
P Directs the airflow to the centre and
Heatmatic/air-conditioning system
Turn the key to position 2 in the ignition
X
lock.
Turn control A to the corresponding sym-
X
bol (
can also be turned to the area between two
symbols.
THERMOTRONIC automatic climate
page 99),
Y
control
Turn the key to position 2 in the ignition
17
.
X
lock.
Turn control E to the corresponding sym-
X
bol . The control can also be turned to the
area between two symbols.
ter vents
ter vents
interior
well and side air vents
side air vents
page 99), ( page 100). The control
Y Y
103
Z