Lamps In Instrument Cluster - Mercedes-Benz 2008 CL-Class Operator's Manual

2008 cl-class
Table of Contents

Advertisement

Practical hints
What to do if ...?

Lamps in instrument cluster

General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem
-
The yellow Antilock
Brake System (ABS)
indicator lamp comes on
while the engine is run-
ning.
608
Possible cause/consequence
The ABS has detected a malfunction and
®
has switched off. The BAS, ESP
, EBP and
®
PRE-SAFE
are also switched off (see mes-
sages in multifunction display).
The brake system is still functioning nor-
mally but without the ABS available.
If the ABS control unit is malfunctioning,
other systems such as Parktronic*,
DISTRONIC Plus*, navigation system, Park
Assist* and the automatic transmission
may also be malfunctioning.
Suggested solution
Continue driving with added caution.
Wheels may lock during hard braking,
reducing steering capability.
Read and observe messages in the mul-
tifunction display ( page 622).
Have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.
Failure to follow these instructions increas-
es the risk of an accident.

Advertisement

Table of Contents
loading

Table of Contents