Table of Contents
Advertisement
2 Camera
Clean inside of windshield in front of
camera 2 with a soft, non-scratching
cloth.
!
If you use a windshield cleaning product,
make sure that none of the cleaning product
comes into contact with the lens of the Night
View Assist camera.
Use recessed handles 1 to swing
camera cover up.
Cleaning the windows and the wiper
blades
!
The windshield wipers must be in a vertical
position before folding them away from the wind-
shield. They could otherwise damage the hood.
Never open the hood when the wiper arms are
folded forward.
Make sure the hood is fully closed.
Placing wiper arms in vertical position
Vehicles with SmartKey:
Turn SmartKey in starter switch
position 1.
Turn combination switch to wiper
setting u ( page 400).
With wiper arm in vertical position, turn
the SmartKey in starter switch to
position 0.
Vehicles with KEYLESS-GO*:
Make sure the vehicle's on-board elec-
tronics have status 1 ( page 366).
Operation
Vehicle care
Turn combination switch to wiper
setting u ( page 400).
Press KEYLESS-GO start/stop button
repeatedly until windshield wipers
start.
Press KEYLESS-GO start/stop button
when the wiper arms are in a vertical
position.
Cleaning
Warning!
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle's on-board electronics have
status 0) before cleaning the windshield
and/or the wiper blades. Otherwise, the
wiper motor could suddenly turn on and
cause injury.
Fold the wiper arms forward until they
snap into place.
G
603
Advertisement
Table of Contents
