Mercedes-Benz 2008 CL-Class Operator's Manual page 691

2008 cl-class
Table of Contents

Advertisement

Practical hints
Replacing bulbs
Notes on bulb replacement
Warning!
Bulbs and bulb sockets can be very hot. Al-
low the lamp to cool down before changing
a bulb.
Keep bulbs out of reach of children.
Halogen lamps contain pressurized gas. A
bulb can explode if you:
touch or move it when hot
drop the bulb
scratch the bulb
Wear eye and hand protection.
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the
lamp and its components. We recommend
that you have such work done by a qualified
technician.
690
Only use 12-volt-bulbs of the same
type and with the specified watt rating.
G
Switch lights off before changing a bulb
to prevent short circuits.
Always use a clean lint-free cloth when
handling bulbs.
Your hands should be dry and free of oil
and grease.
If the newly installed bulb does not
come on, contact an authorized
Mercedes-Benz Center.
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:
Bi-Xenon lamps
Front turn signal lamps
Front fog lamps
Additional turn signal lamps in the exte-
rior rear view mirrors
Parking and standing lamps
Front side marker lamps
High mounted brake lamp
Brake, tail and rear standing lamps
Rear side marker lamps
Rear fog lamp
Rear turn signal lamps
Rear side marker lamps
License plate lamps
!
Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by an autho-
rized Mercedes-Benz Center.
i
Have the headlamp adjustment checked
regularly.

Advertisement

Table of Contents
loading

Table of Contents