Table of Contents
Advertisement
Control systems
COMAND navigation system (entering a destination)
i
In the list of input characters 4, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.
While the numbers are being selected as
described below, the top list entry 3 al-
ways shows the house number which best
corresponds to the input data as it has
been entered up to that point.
At the same time, COMAND automatically
supplements numbers 1 entered by the
user with appropriate numbers 2.
omp
Selecting numbers: Slide
rotate ymz.
or
Selecting a number with the telephone
keypad using the R - 9 buttons
( page 86).
Confirming number selection:
Press n.
214
Deleting individual numbers:
Select ) in the bottom line and
press n.
Deleting an entire entry: Select ) in
the bottom line and press n until the
entire entry is deleted.
Canceling an entry: Select "Back" in
the bottom line and press n.
or
Press back button L in the center
console ( page 84).
As soon as COMAND can clearly attribute
or
the numbers entered to a house number,
the input characters 4 disappear. You see
the list of house numbers without the input
characters. Here you can confirm the cur-
rent entry or make another selection.
During number entry, you can also manual-
ly switch to the list of house numbers with-
out input characters at any time.
Switching manually to the list of
house numbers without input char-
acters: Slide qm.
or
Select ? in the second line from the
bottom and press n.
Advertisement
Table of Contents
