Mercedes-Benz 2008 CL-Class Operator's Manual page 280

1 Scale
2 Cursor
3 Current setting
qmr ymz
Slide or rotate until desired
setting is reached.
Saving setting: Press n.
Adjusting backrest sides
This function is used to adjust the air
chambers in the backrest sides.
Select seat ( page 276).
Selecting "Seatback Sides":
qmr or rotate ymz.
Slide
Confirming selection: Press n.
A scale appears.
qmr ymz
Slide or rotate until desired
setting is reached.
Saving setting: Press n.
Control systems
COMAND seats
Adjusting backrest curvature in lumbar
area
This function is used to adjust the air
chambers in the lumbar area of the back-
rest.
Select seat ( page 276).
omp
Selecting "Lumbar": Slide
rotate ymz.
Confirming selection: Press n.
Cross-hairs appear. You can use them
to make two settings:
vertical: shift the point of greatest
curvature upward or downward
horizontal: adjust the degree of
curvature
or
279