Table of Contents
Advertisement
Control systems
COMAND navigation system (entering a destination)
Canceling an entry: Select "Back" in
the bottom line and press n.
or
Press back button L in the center
console ( page 84).
As soon as COMAND can clearly attribute
the characters entered to a state, the input
characters 7 disappear automatically.
You see the list of states without the input
characters. Here you can confirm the cur-
rent entry or make another selection.
During character entry, you can also man-
ually switch to the list of states without in-
put characters at any time.
Switching manually to list of states
without input characters: Slide qm.
or
Select ? in the second line from the
bottom and press n.
200
List of states without input characters
qmr
Selecting a state: Slide
rotate ymz.
Canceling selection: Select "Back" by
sliding om and press n.
or
Press back button L in the center
console ( page 84).
Confirming selection: Press n.
The address input menu appears again.
It shows the abbreviation for the se-
lected state.
The following menu items are now avail-
able:
"Map": Entering a destination from the
map ( page 221)
"State/Prov": Re-enter state (USA) or
province (CDN)
"City": Entering a city ( page 204)
"Street": Entering a street
( page 207)
or
"Zip Code": Entering the zip code
( page 202)
i
It is not possible to enter zip codes if the dig-
ital map does not contain any zip codes for the
selected state.
Continuing destination entry:
Select one of the menu items men-
tioned above.
Advertisement
Table of Contents
