Table of Contents
Advertisement
3.1 Introduction
This chapter describes basic features and procedures for using the
panel PC. Topics covered include the floppy drive, CD-ROM drive, I/O
ports, touchscreen, and so on.
3.2 Floppy Drive
To insert a floppy disk, hold it with your left hand, between your
thumb and your other fingers, and push it toward the drive. (See Fig. 3-
1.) Slide the disk until it clicks into place. Note that new disks must be
formatted by your operating system before you can use them for data
storage. See your operating system manual for details.
To eject a floppy disk, first make sure that the drive activity light is off,
and then press the eject button on the drive. When the disk pops out
of the drive, remove it and store it properly.
Floppy disk drive
Floppy disk
Figure 3-1: Inserting and ejecting a floppy disk
2 8
PPC-153 User's Manual
Advertisement
Table of Contents
