Operation - Cardinal Detecto 6127 Series Operating Instructions Manual

ALWAYS assist the patient in stepping on and off the scale platform to
ensure they do not fall. NEVER leave a patient unattended while they are on
the scale platform. Failure to maintain control of the patient at all times can
result in serious injury to you and/or the patient.
To Weigh
1. Set scale on any hard, level, flat surface or low-cut carpet.
2. Press ON/OFF key to turn on indicator.
3. Press ZERO key to zero weight display. The ZERO and lb or kg annunciator will turn on
to show that scale is ready for use.
4. Place patient on scale and read weight display.
5. Remove patient from scale.
Zero Weight Display
1. If the indicator is not showing zero weight on the display, press ZERO key.
2. Weight display will return to zero. ZERO, STABLE  and lb or kg annunciators will
turn on to show a stable, center-of-zero weight condition.
Metric Conversion
Press UNITS key to toggle between pounds and kilograms. Note that lb or kg
annunciator will turn on to show which weighing unit is active.
8525-M310-O1 Rev E  612X Series and 633X Series
4

OPERATION