Installing A Hard Disk Drive - Asus Pedestal Server TS100-E4/PI2 User Manual

2.5 Installing a hard disk drive

The server system supports one
Serial ATA hard disk drive through a
detachable hard disk drive cage.
You may purchase a second
hard disk drive cage to install
an additional HDD. Refer to the
next chapter for details.
Hard disk drive installation
The detachable hard disk drive cage accommodates one Serial ATA hard
disk drive.
To install the first Serial ATA hard disk drive:
Configure your hard disk drive as Master/Slave device before installing
it to the drive cage. Refer to the HDD documentation on how to set the
drive as a Master/Slave device.
1. First remove side cover.
2. Then, press the HDD cage lock
while pulling the cage out from
the chassis. Place the HDD cage in
a flat surface.
3. Install the SATA HDD.
ASUS TS100-E4/PI2
Hard disk drive cage
2-11