Rebuilding Failed Drives - Asus Pedestal Server TS100-E4/PI2 User Manual

5.3.4 Rebuilding failed drives

You can manually rebuild failed hard disk drives using the Rebuild or Objects
command in the Management Menu.
Using the Rebuild command
To rebuild a failed hard disk drive using the Rebuild command:
1. From the Management Menu, highlight Rebuild, then press <Enter>.
2. The PHYSICAL DRIVES SELECTION MENU displays the available drives
connected to the SATA ports. Select the drive you want to rebuild,
then press <SpaceBar>.
ASUS TS100-E4/PI2 5-27