Table of Contents
Advertisement
5.3 LSI Logic Embedded SATA RAID Set-
up Utility
The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0
or RAID 1 set(s) from SATA hard disk drives connected to the SATA connec-
tors supported by the motherboard Southbridge chip.
The LSI Logic Embedded SATA RAID automatically configures a RAID 1
(Mirrored) set when the SATA is configured as RAID in the BIOS and you
installed two hard disk drives without a RAID configuration.
To enter the LSI Logic Embedded SATA RAID Setup Utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, the LSI Logic Embedded SATA RAID Setup Utility auto-
matically detects the installed SATA hard disk drives and displays any
existing RAID set(s). Press <Ctrl> + <M> to enter the utility.
You may also create a RAID set(s) in a Windows
using the Global Array Manager (GAM) application. Refer to the GAM user
guide in the motherboard support CD for details.
5-12
operating environment
®
Chapter 5: RAID Configuration
Advertisement
Table of Contents
