Table of Contents
Advertisement
5.2 Intel
ROM Utility
The Intel
Matrix Storage Manager Option ROM utility allows you to create
®
RAID 0 or RAID 1 from Serial ATA hard disk drives that are connected to the
Serial ATA connectors supported by the Southbridge.
To enter the Intel
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl> + <I> to display the utility main menu.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0
XXXXXXXXXXX
1
XXXXXXXXXXX
2
XXXXXXXXXXX
3
XXXXXXXXXXX
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference
only and may not exactly match the items on your screen.
5-4
Matrix Storage Manager Option
®
Application Accelerator RAID Option ROM utility:
®
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ DISK/VOLUME INFORMATION ]
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
[↑↓]-Select
[
MAIN MENU
]
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
XX.XXGB
XX.XXGB
XX.XXGB
XX.XXGB
[ESC]-Exit [ENTER]-Select Menu
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 5: RAID Configuration
Advertisement
Table of Contents
