Table of Contents
Advertisement
6.2
LSI Logic Embedded SATA RAID Setup
Utility
The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0
or RAID 1 set(s) from SATA hard disk drives connected to the SATA connectors
supported by the motherboard Southbridge chip.
The LSI Logic Embedded SATA RAID automatically configures a RAID 1
(Mirrored) set when the SATA is configured as RAID in the BIOS and you
installed two hard disk drives without a RAID configuration.
To enter the LSI Logic Embedded SATA RAID Setup Utility:
1.
Turn on the system after installing all the SATA hard disk drives.
2.
During POST, the LSI Logic Embedded SATA RAID Setup Utility
automatically detects the installed SATA hard disk drives and displays any
existing RAID set(s). Press <Ctrl> + <M> to enter the utility.
LSI Logic Embedded SATA RAID BIOS Version 5.5.03031654R
(C)2004 Copyright LSI Logic Corporation. ALL Rights Reserved.
LSI Logic Embedded SATA RAID Found at PCI Bus No:00 Dev No:1F
Scaning for Port0 ... Responding.
Scaning for Port1 ... Responding.
01 Logical drive(s) Configured.
Array#
00
Reliability
Press Ctrl-M to run LSI Logic Embeded SATA RAID Setup Utility.
You may also create a RAID set(s) in a Windows
the Global Array Manager (GAM) application. Refer to the GAM user guide in
the motherboard support CD for details.
6-4
Mode
Stripe Size
64KB(128 Sectors)
HDS722512VLSA80
117800MB
HDS722512VLSA80
117800MB
No.Of Stripes
02
®
Chapter 6: RAID Configuration
UDMA5
UDMA5
DriveSize
Status
1143376MB
Online
operating environment using
Advertisement
Table of Contents
