Cisco 7925G Deployment Manual page 41

Gratuitous ARP
Settings Access
Web Access
Locked Profiles
Load Server
Admin Password
Special Numbers
Application URL
"Send" Key Action
Phone Book Web Access
Unlock-Settings Sequence
Application Button Activation
Timer
Application Button Priority
Out of Range Alert
Cisco Unified Wireless IP Phone 7925G Deployment Guide
Determines whether the phone will learn MAC addresses from Gratuitous ARP
responses or not.
Settings Access can be used to limit user access to certain menus (i.e. Network
Profiles).
This parameter indicates whether the phone will accept connections from a web
browser or another HTTP client. Web Access can be set to Full, where
configuration changes can be made remotely or Read Only to provide information
but not allowing changes to be made.
Individual profiles can also be locked, which does not allow the user to modify
those settings.
A load server can be specified in IP format (x.x.x.x) if wanting to use an alternate
TFTP server for phone firmware downloads.
The admin password is used for web access. With Cisco Unified Communications
Manager 5.0 or later the admin password must be managed in Communications
Manager Administrator page, where previous versions allow local management.
Special numbers can be programmed to dial out regardless of keypad lock state (i.e.
911).
The application URL can be configured, which will convert the application button
to a service URL button or as a speed dial.
The application URL can be configured to link to a Push To Talk server for quick
access.
(I.e. PTT server =
http://x.x.x.x:8085/PushToTalk/displayPhoneGroupsMenu.do?sep=#DEVICENAM
E#)
To configure the application button as a speed dial, enter in the format as "Dial:X"
(i.e. Dial:23675).
"Send" key action determines whether the green dial button is to use onhook dialing
and serve as last number redial, where a list of previously dialed numbers will be
listed, or to use offhook dialing, which will play dial tone.
Phone book web access must be set to "Allow Admin" in order to access the phone
book via the web page.
By default, **# must be entered to unlock a menu that contains configurable items,
which can optionally be disabled.
The activation timer and priority of the application button can also be specified.
This determines how long the button must be pressed and held to activate.
If the priority is low, then will only function when the keypad is unlocked and on
the home screen. Medium priority will allow the application button to function
when in any menu or XML screen and high priority will allow the application
button to function when in any state including keypad lock.
An out of range alert can be configured to beep once or periodically to audibly
notify the user that they have traveled out of the coverage area.
41