KitchenAid KICU508SBL Technical Education page 25

4. Disconnect the induction element assembly
connectors from the electronic board as
follows:
2-wire connector at CNT3.
2-wire connector at CNT1.
Red wire at FST1.
Green wire at FST2.
Induction element screw terminals at CNX1,
CNX2, CNX3 & CNX4.
FST2
CNT1
CNX2
CNX1
CNX3
CNX4
Electronic Board
FST1
CNT3
5. Remove the induction element assembly
from the cooktop.
6. Unhook the two cover tabs and remove
the cover from the induction element you
are replacing.
Left Induction Element Assembly
RR Element
Cover & Tabs
Right Induction Element Assembly
4-5
LR Element
Cover & Tabs
LF Element
Cover & Tabs
RF Element
Cover & Tabs