Removing The Touch Control Board - KitchenAid KICU508SBL Technical Education

REMOVING THE TOUCH CONTROL BOARD

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug cooktop or disconnect power.
2. Remove the cooktop glass from the cooktop
(see page 4-2 for the procedure).
Touch Control Board
3. Press and unlock the two holder tabs, raise
the touch control board, and remove the
board from the holder.
4. Slide the three edge connectors off the
touch control board.
Touch Control Board Connectors
5. To remove the touch control board holder,
remove the four mounting screws.
Touch Control Board Holder & Screws
4-3
Touch Control Board Holder Tabs