Operation; Charge Corona Unit On/Off Control - Konica Minolta bizhub c10 Service Manual

Theory of operation ver. 2.0 Nov. 2007

11.2 Operation

11.2.1

Charge corona unit ON/OFF control

• The grid voltage (Vg) applied to the grid mesh is controlled by image stabilization control.
Rack Motor (M2)
Developing Motor (M3)
Main Motor (M1)
Charge output bias
Confidential – for internal use only, do not distribute
Polygon Motor Energized
K Toner Developing Position
Y M
11. Charge corona section
Standby Position
Belt Positioning
Sensor Activated
C K Y
4139to2060e0
27