Operation Timing; Operation Flow - Konica Minolta bizhub c10 Service Manual

19. Image stabilization control

19.3 Operation timing

Mode
• The environment in which the power switch is turned ON is different from the environ-
ment the machine was in when the power switch was turned OFF last.
• The environment in which the energy saver mode is canceled is different from the envi-
Mode 1 ronment the machine was in when it entered the energy saver mode last.
• The power switch is turned OFF and ON or the energy saver mode is canceled after a
predetermined number of printed pages have been produced.
• A new drum cartridge or toner cartridge is detected.
• The power switch is turned OFF and ON or the energy saver mode is canceled after a
Mode 2
predetermined number of printed pages have been produced.

19.4 Operation flow

72
Confidential – for internal use only, do not distribute
Operation timing
Mode 1
ATVC control
Leak detection control
AIDC intensity control
Reflectance
measurement control
Control of the maximum
amount of toner sticking
Laser intensity control
γ correction control
Theory of operation ver. 2.0 Nov. 2007
Mode 2
AIDC intensity control
Control of the maximum
amount of toner sticking
Reflectance
measurement control
Laser intensity control
4139to2099e0