Cont Interface; 2: Dial Switch; 3: 10/100M Udp Interface; 4: Usb Interface - RGBlink VSP 516S User Manual

2. Hardware Orientation
VSP 516S Back Panel
The figure below illustrates the professional interface and control signals of
VSP 516S back panel with two sending cards.
NO
1 3G-SDI input BNC CVBS port 18~20
2 Dial the code switch
3.6.7.11.12 10/100M Interface RJ45
4.9.14 USB Interface
5 RS232 Interface
Power supply port of
8.13
Sending Card
DVI input port of
10.15
sending card
16 Switch
17 Displayport Input

CONT Interface

2: Dial Switch

If the two dial switches are upwards, the device is in normal work, and if
they are downwards, the device is in upgrade state. OLED module light is
off when the device is in upgrade state. Some of the button lights turn on,
and the device will not work.

3: 10/100M UDP Interface

Used to connect the windows control program or device upgrade.

4: USB Interface

VSP 516S
INTERFACE NO
CVBS Input BNC port
21 S-Video DIN 4
22 DVI Input DVI-I
23~25 YPbPr Input
26 VGA Input DB15 port
27 Audio Output
28 DVI Output DVI-I
29 DVI+VGA DVI-I Output
30 Power IEC-3 port
User Manual
INTERFACE
30