Table of Contents
Advertisement
4. Menu Orientation
MENU
Details please refer to the instructions in the manual:
How to Do
customized
Resolution.
OUTPUT ADJUST: Output adjust menus, the sub-menu as following:
DVI1, setting as following:
DVI MODE: Can set the protocol as HDMI or DVI, default is DVI output,
HDMI signal output will enable when HDMI option checked.
BIT DEPTH: Can set the image bit depth.
DATE RANGE: DVI1 output range, can set as RGB (graphic mode or
YCbCr (video mode), RGB output scale range is between 0-255, YCbCr
range from 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or close, when choose open, it can be
adjusted to DE, as follows:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
When the signal source of the screen appear black side, can use this
function to shift the black out of the screen.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
DVI2: Including DVI MODE, DATA RANGE, DE ADJUST, and RESET,
same with DVI1.
Note
Only comments to professional operator.
SCALE：It can adjust the image scale size and image position settings
including as follows:
VSP 516S
User Manual
47
Advertisement
Table of Contents
