Table of Contents
Advertisement
the screws, as shown in Figure 4.
4. Close and reinstall the processor, see ―Closing the Processor‖ in Part 3.
Part 3: Assemble the VSP 516S
Specific steps are as follows:
1. Secure the back panel with the screws.
2. Replace the top cover on the VSP 516S.
3. Fasten it with the screw that were removed in ―Opening the Processor‖
part.
4. If desired, reconnect all cables.
VSP 516S
(Figure 4)
User Manual
131
Advertisement
Table of Contents
