5. Communication Software Guideline
How to Connect Windows Control Program by LAN Interface
How to Connect Windows Control Program by LAN
Interface
First, install the upper computer software in the computer;
Connect VSP 516S and computer with cable, the connection diagram is
as follows:
Version 1: VSP 516S with audio:
Version 2: VSP 516S with two sending cards:
Power on VSP 516S, start the network function, specific steps are as
follows: MENU--SYSTEM -- ETHERNET -- NERWORK, select ON, and
check the IP address of the equipment, confirm if it is consistent with the
computer, such as 192.168.0.***, take 192.168.0.100 for example.
Open the upper computer software, click
follows:
VSP 516S
, interface is shown as
User Manual
78