2.2.12. Printer Cover (106), Rear Cover (105), Printer Motor (626)
(2)
(5)
(8)x5
(10)
(3)
(4)
(6)
(9)
(7)
(11)
(1) Remove the Left Cover and the Right Cover
(Refer to 2.2.2.).
(2) Release the hooks and remove the Printer
Cover (106).
(3) Remove 2 Silver Screws (B1).
(4) Remove the Rear Cover (105).
(5) Remove 1 Screw (19).
(6) Remove the Ground Wire (542).
(7) Disconnect the Connector from the Printer
Motor.
(8) Remove 5 Screws (19).
(9) Remove the Printer Motor Bracket (616)
Assembly.
Caution:
The Gears underneath may dislodge when the
Motor Bracket is removed.
(10) Remove 2 Screws (4N).
(11) Remove the Printer Motor (626).
34