Panasonic UF-580 Service Manual page 181

No. Maintenance Mode
1 FIRMWARE UPDATE
(UF-590/790)
FIRMWARE UPDATE
(UF-580/780)
2 FIRMWARE BACKUP
3 PARAMETER
RESTORE
4 PARAMETER BACKUP Creates a Backup Card of the machine's parameters.
PC → FLASH CARD
5
(UF-590/790)
ERAsE FLASH CARD
(UF-580/780)
8 SEND RECEIVED FILE Transfers documents from memory to another fax machine
Note:
1. For a UF-790 with Firmware V1.04 and updating the Firmware to V2.xx,
please see Section 3.4.6 for Instructions.
2. The created Backup Card must be removed from the machine.
System Maintenance Table
1:Card → Host
Updates the firmware in the machine with the Master Firmware
Card.
2:PC → Host
Updates the firmware in the machine with the Master Firmware
from the PC. After the firmware is updated, the machine reboots
automatically and returns to standby. See Note 1.
Card → Host (No Selection)
Updates the firmware in the machine with the Master Firmware
Card.
Creates a Backup Card of the machine's firmware.
(A 2 MB or higher Flash Memory Card is required) See Note 2.
Restores the parameters from the Backup Card into the machine.
(A 1 MB or higher Flash Memory Card is required) See Note 2.
Creates a Master Firmware Card using the Firmware Update
Tool.
(A 2 MB or higher Flash Memory Card is required)
Erases the Firmware from the Card.
during a fatal printer error.
181
Description