Panasonic UF-580 Service Manual page 180

5.1.9. Service Mode 9 (System Maintenance)
5.1.9.1. Overview
This Service Mode is used to maintain and/or update the firmware of the machine. Use the following
procedure for System Maintenance.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "9".
5 Press "START" to update the firmware.
Enter No. or press "\/" or "/\" to select the maintenance
to be performed.
Ex: Enter "2".
6 Press "SET" and "START".
7 After the backup is completed, repeat step 4 through 6
to request an operation.
8 Press "STOP" twice to return to standby.
Service Mode 9
Operation or Unit Condition
180
LCD Display
MMM-dd-yyyy 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
SYSTEM MAINT. (1-8)
1:FIRMWARE UPDATE
SYSTEM MAINT. (1-8)
2:FIRMWARE BACKUP
FIRMWARE BACKUP
* IN PROGRESS *
SERVICE MODE
ENTER NO. OR
MMM-dd-yyyy 15:00
00%