Panasonic UF-580 Service Manual page 161

5.1.3.5. Protocol Trace
Print a Protocol Trace Report for the previous communication.
Step
1 Standby
2 Press "FUNCTION" and then "7".
3 Press "MONITOR" four times, then press "*".
4 Press "3".
5 Press "6" and "START".
Note:
If there were no transmission or reception mode
after the power is last turned on, you cannot print
the Protocol Trace Report.
6 After printing is completed, the unit returns to the
display in step 3.
7 Press "STOP" to return to standby.
Service Mode 3 - Protocol Trace
Operation or Unit Condition
161
LCD Display
MMM-dd-yyyy 15:00
00%
SET MODE (1-6)
ENTER NO. OR
SERVICE MODE
ENTER NO. OR
PRINTOUT (1-7)
1:FUNC. PARAM. LIST
* PRINTING *
PROTOCOL TRACE
SERVICE MODE
ENTER NO. OR
MMM-dd-yyyy 15:00
00%