Installation Of The Decorative U-Shaped Inserts - Enerzone Solution 1.6 User Manual

1.1.2 Installation of the decorative u-shaped inserts

Your freestanding Enerzone wood stove is equipped with decorative u-shaped inserts. See table
1.1.2 below for installation instructions :
Table 1.1.2 Installation of the decorative u-shaped inserts
1- Remove the 7 screws that retain the
side panels and the rear heat shield
deflector.
2- Remove the side panels and clip the
U-shaped inserts (choose between
gold or nickel finish) at the top and
bottom of each panel.
3- Screw the side panels and heat shield
deflector back into place.
6