Section 1.0 Installation; General Installation - Enerzone Solution 1.6 User Manual

SECTION 1.0
When installed and operated as described in these instructions, the E.P.A Enerzone wood stove is
suitable for use as a freestanding wood stove in residential installations. The E.P.A Enerzone wood
stove is not intended for installation in a bedroom.
In Canada, the CSA B365 Installation Code for Solid Fuel Burning Appliances and Equipment and
the CSA C22.1 Canadian National Electrical Code are to be followed in the absence of local code
requirements. In the USA, the ANSI NFPA 70 National Electrical Code and NFPA 211 Standard for
Chimneys, Fireplaces, Vents and Solid Fuel-Burning Appliances are to be followed in the absence of
local code requirements.
In addition to the national installation and/or local building codes, fire officials (or other authorities
having jurisdiction) should be contacted to determine what restrictions and installation requirements
might apply locally.
Only Solution 1.6 and Solution 1.8 models are mobile home approved. Refer to the mobile home
installation section for details.
1.1

GENERAL INSTALLATION

CAUTION:
•
MIXING OF APPLIANCE OR FLUE SYSTEM COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING THE
DIMENSIONAL SPECIFICATION OF COMPONENTS MAY RESULT IN HAZARDOUS CONDITIONS
ACTION IS CONSIDERED
• D
O NOT CONNECT THIS UNIT TO ANY AIR DISTRIBUTION SYSTEM
•
CRACKED AND BROKEN COMPONENTS
INSTALLATION UNSAFE
• A
SOURCE OF FRESH AIR INTO THE ROOM OR SPACE HEATED SHALL BE PROVIDED WHEN REQUIRED
•
INSTALL A SMOKE DETECTOR IN THE ROOM WHERE THE STOVE IS LOCATED
•
C
ONNECT THE STOVE ONLY TO A LINED MASONRY CHIMNEY CONFORMING TO NATIONAL AND LOCAL
BUILDING CODES FOR USE WITH SOLID FUEL
USE WITH SOLID FUEL
INSTALLATION
,
THE MANUFACTURER SHOULD BE CONSULTED IN THE FIRST INSTANCE
, e.g.
.
,
.
.
GLASS PANELS OR CERAMIC TILES
OR TO A LISTED FACTORY BUILT CHIMNEY SUITABLE FOR
.
WHERE SUCH
.
,
MAY RENDER THIS
.
4