Tool Kit; Winch; Winch Control Switch - Can-Am 2009 Outlander 500 Operator's Manual

ufacturer recommendations. Refer to
SPECIFICATIONS
and towing recommendations.
TYPICAL
1. Trailer hitch
WARNING
Ensure to install the proper ball
size that matches the equipment
you will tow.
NOTE: Follow manufacturer's instruc-
tions for proper attachment.

15) Tool Kit

The tool kit is located in the rear stor-
age compartment. It contains tools
for basic maintenance, this Opera-
tor's Guide and the
WINCHING TECHNIQUES
models.
for carrying loads
BASIC GUIDE TO
with the XT
_______________
CONTROLS/INSTRUMENTS/EQUIPMENT

16) Winch

XT Models
vmo2007-003-016_a
1. Winch
2. Roller fairlead
3. Winch hook

17) Winch Control Switch

XT Models
Use this switch to roll in or out wire
from winch.
To take out wire from winch, press the
left side of switch.
To get wire into the winch, press the
right side of switch.
BASIC GUIDE TO WINCHING
Refer to
TECHNIQUES
for more information.
NOTE: A winch remote control is al-
so provided with the vehicle to ease
winch operation if necessary, refer to
WINCH REMOTE CONTROL
this section.
further in
69