Fisher & Paykel DishDrawer DD605 Installation Instructions Manual page 4

These marks indicate mounting tab screw locations
*
Preferred position. If adequate clearance, services hole can be higher to clear toekick space.
If hole is higher, ensure drain hoses are routed straight into the waste connection.
Water Connection
Recommended COLD (Maximum 60°C).
¾ " BSP (GB20) to suit at washer.
Water Pressure
Water softener models 1 MPa (145 psi)
Other models 1 MPa (145 psi)
Drains will need to be separated to satisfy kosher requirements. We suggest you con rm acceptability with your local rabbi in respect to kosher installations.
Max. distance of
hoses and cord from
chassis edge
Drain hose
Inlet hose
Power cord
Max Min
0.1 MPa (14.5 psi)
0.03 MPa (4.3 psi)
Left hand Right hand
side side
2011 mm 1794 mm
1561 mm 1344 mm
1776 mm 1559 mm
Left hand Right hand
side side