Micro Secure Digital (Microsd) Card - Motorola MC75A Integrator Manual

These settings are configurable and the factory default settings are shown in
change/update.
Wake-up Default Settings
Table 1-3
Condition for Wake-up
AC power is applied to the MC75A.
The MC75A is inserted into a cradle.
The MC75A is removed from a cradle.
The MC75A is connected to a USB cable.
Mobile computer is disconnected from a USB device.
Mobile computer is connected from a USB Host device.
A key is pressed.
The scan button is pressed.
The screen is touched.
Audio Jack
Audio Btn
A Bluetooth device tries to communicate with the
MC75A.
On Motion
The MC75A is connected to a serial accessory.
Incoming phone call

Micro Secure Digital (microSD) Card

The microSD card slot provides secondary non-volatile storage. The slot is located on the side of the MC75A (see
Figure 1-5). Refer to the documentation provided with the card for more information, and follow the manufacturer's
recommendations for use.
CAUTION
To install the microSD card:
Remove the memory card cover on the side of the MC75A by loosening the two captive screws.
1.
Follow proper ESD precautions to avoid damaging the SD card. Proper ESD precautions include, but
are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
Table 1-3
Power Button
No
No
No
Yes
No
No
No
No
No
No
Yes
Yes
No
No
Yes
Getting Started 1 - 7
are subject to
Automatic Time-out
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes