7 - 2
MC75A Enterprise Digital Assistant Integrator Guide
General Tab
Use the General tab to view IST software information and control the display of the IST Setting icon.
General Tab
Figure 7-2
IST General Tab Information
Table 7-2
Item
Firmware Version
Driver Version
Sensor ID
Sensor Description
Status
Show IST service icon
in task bar
Power Management Tab
Use the Power Management tab to configure power management settings.
Displays the version information of IST device firmware.
Displays the version information of IST driver.
Displays identification tag of the sensor.
Displays a description of the sensor.
Displays status information of the IST device. If the IST is not working properly it displays
the error message.
Device working Properly - Normal state.
IST Hardware not present - When there is no response from IST hardware. Please
contact service department.
Need calibration - Device is not calibrated. Contact your system administrator.
Enables the IST Setting icon to display in the Command bar.
Description