Chapter 7 Interactive Sensor Technology
Introduction
This chapter provides information for configuring the Interactive Sensor Technology (IST) settings. IST settings can
be accessed:
•
Tap Start > Settings > System > IST Settings icon.
•
Tap the IST Settings icon in the Command bar (if the classic Today screen is configured).
IST Settings Icon
Figure 7-1
IST Menu
Use this menu to access the configuration settings listed in
mark next to the option.
IST Tray Icon Menu Items
Table 7-1
Menu Item
Configure IST
Hide
Wake Up On Motion
Keep Alive On Motion
Auto Display Orientation
Configuration
IST Settings Icon
Opens the IST Settings window.
Removes IST Settings icon from the Command bar.
Wakes the MC75A from suspend mode if it was placed in suspend mode due to
inactivity.
Prevents going into suspend mode motion is detected. See
on page 7-3
Enables auto display orientation. See
information.
Table
7-1. An enabled options is indicated with a check
Description
for more information.
Display Tab on page 7-4
Keep Alive On Motion
for more