General Tab - Motorola MC31 Series Integrator Manual

7 - 2 MC9500-K Mobile Computer Integrator Guide
IST Tray Icon Menu Items
Table 7-1
Menu Item
Configure IST
Hide
Wake Up On Motion
Keep Alive On Motion
Auto Display Orientation

General Tab

Use the General tab to view IST software information and control the display of the IST Setting icon.
General Tab
Figure 7-3
IST General Tab Information
Table 7-2
Item
Firmware Version
Driver Version
Sensor ID
Sensor Description
Status
Show IST service icon
in task bar
Opens the IST Settings window.
Removes IST Settings icon from the Command bar.
Wakes the MC31XX from suspend mode if it was placed in suspend mode due to
inactivity.
Prevents going into suspend mode motion is detected. See
on page 7-3 for more information.
Enables auto display orientation. See
information.
Displays the version information of IST device firmware.
Displays the version information of IST driver.
Displays identification tag of the sensor.
Displays a description of the sensor.
Displays status information of the IST device. If the IST is not working properly it displays
the error message.
Device working Properly - Normal state.
IST Hardware not present - When there is no response from IST hardware. Please
contact service department.
Need calibration - Device is not calibrated. Contact your system administrator.
Enables the IST Setting icon to display in the Command bar.
Description
Display Tab on page 7-4
Description
Keep Alive On Motion
for more