Advertisement
TO BE COMPLETED BY THE INSTALLER
Make sure the oven is level and securely fitted to the cabinetry and the oven door opens and closes freely.
Make sure all the internal packaging has been removed from the oven cavity.
Make sure all oven vents and openings are clear and are free of any obstruction/damage.
OB60S3, OB60S4, OB60S7, OB60B models: Check the lower trim is still undamaged - open the oven door slowly to its fully open position and check if there is adequate clearance
between the bottom of the door and the lower trim. This is to ensure correct air circulation. Should the lower trim become damaged, straighten it and ensure the oven door opens
fully without obstruction.
OB60SL models: Check there is adequate clearance between the bottom of the door and the lower trim. This is to ensure correct air circulation. Should the lower trim become
damaged, straighten it and ensure the oven door opens fully without obstruction.
Check that the power supply cable does not touch any metal parts that can become hot during use.
Have you affixed the supplied duplicate data plate label on an adjacent
surface accessible to the customer?
Make sure that the isolating switch is easily accessible by the customer.
Turn the power to the oven on. On some models, the display should light up and show
Advise the customer to follow the instructions in their user guide in section 'First use'.
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer's Name
Installer's Signature
Installation Company
Installation Date
8
FINAL CHECKLIST
.
9
Advertisement
