The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website listed on the cover or contact your local ELBA by Fisher & Paykel dealer.
Page 3
PRODUCT DIMENSIONS (OB60S MODELS) FRONT SIDE Product Dimensions Overall height* of product Overall width of product overall depth of product (excluding handle and knobs) Height of chassis Width of chassis Depth of chassis Depth of oven frame and control panel (=distance between front of chassis and front of oven door, excl.
Page 4
CABINETRY DIMENSIONS (OB60S MODELS) Electrical supply 16-20 mm min. 2.5 mm SIDE Cabinetry Dimensions Minimum inside width of cavity Overall width of cavity Inside height of cavity Overall height of cavity Minimum inside depth of cavity Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the cooktop manufacturer’s instructions.
Page 5
PRODUCT DIMENSIONS (OB60B MODELS) SIDE FRONT Product Dimensions Overall height* of product Overall width of product overall depth of product (excluding handle and knobs) Height of chassis Width of chassis Depth of chassis Depth of oven frame and control panel (=distance between front of chassis and front of oven door, excl.
Page 6
CABINETRY DIMENSIONS (OB60B MODELS) Electrical supply 16-20 mm min. 2.5 mm SIDE Cabinetry Dimensions Minimum inside width of cavity Overall width of cavity Inside height of cavity Overall height of cavity Minimum inside depth of cavity...
Page 7
PRODUCT DIMENSIONS (OB60SL MODELS) FRONT SIDE Product Dimensions Overall height* of product Overall width of product overall depth of product (excluding handle and knobs) Height of chassis Width of chassis Depth of chassis 16-20 mm Depth of oven frame and control panel (=distance between front of chassis and front of oven door, excl.
Page 8
CABINETRY DIMENSIONS (OB60SL MODELS) 16-20 mm Electrical supply min. 2.5 mm Flush Installation IMPORTANT! 16-20 mm Doors of adjacent cabinetry may need adjusting to allow the oven door to open properly: a minimum clearance of 5mm is recommended. min. 5 mm SIDE Proud Installation Cabinetry Dimensions...
Page 9
PRIOR TO INSTALLATION Before you install the oven, make sure that the benchtop and oven cavity are square and level, and are the required dimensions ● the installation will comply with all clearance requirements and applicable standards and regulations ● a suitable isolating switch providing full disconnection from the mains power supply is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and ●...
Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing ● difficult. Fisher & Paykel will not cover the costs of removing the oven, or of damage OB60SL, OB60S3, OB60S4 and OB60S7 models caused by this removal. Model code...
Make sure all oven vents and openings are clear and are free of any obstruction/damage. OB60S3, OB60S4, OB60S7, OB60B models: Check the lower trim is still undamaged - open the oven door slowly to its fully open position and check if there is adequate clearance between the bottom of the door and the lower trim.
Need help?
Do you have a question about the OB60S3 and is the answer not in the manual?
Questions and answers