Table of Contents
Advertisement
3
Printer Setting and Control
USB Keyboard
When plug-in an USB keyboard to the printer, LCD touch panel will display "Enter Standalone", press the
"Y" key on keyboard to entering "Keyboard Mode" operation. Under this model can perform "Recall Label",
set "Country Code", "Code Page", "Clock Setting", "Database Setting" and "Label Edit".
Connect a USB keyboard to the printer, if not into the keyboard mode, press the "N" key to leave.
Into Standalone mode of operation, to leave the Standalone operation, press "ESC" key to exit.
After leaving the keyboard mode, for re-entry, press the keyboard "F1" key or reboot, you can follow the steps
in the first step choose whether or not (Y / N) into the keyboard mode.
Scanner
When plug-in an USB scanner to the printer, LCD touch panel will display "Enter Standalone", tap the "Feed" Key to
entering "Keyboard Mode" operation.
Note
**
The USB Host port on printer is not support ''USB HUB'' function.
**
The USB Memory Stick supports with ''FAT32''Disk Format and up to 32GB only. The certified venders are Transcend,
Apacer, ADATA, Patriot, Consair and Kingston.
**
The USB Memory Stick only supports download through the printer, On a PC, user may copy entire folder "\LABELDIR"
from USB memory stick to PC or vice-versa. Can not copy the data to USB Memory Stick via PC individually.
**
External USB Host port is for power 500mA, is not recommended as electronics charging use.
38
Advertisement
Table of Contents
