Table of Contents
Advertisement
5
Accessories
5.
Open the cover on the bottom of printer.
6.
Plug the connector for the cutter to the jack.
7.
Close the cover of the module connection jacks.
****The printer must be switched off, or the motherboard may be destroyed!
****There are 2 jacks : the lower jack for the label dispenser, the upper jack for the cutter.
Open the cover
Plug
Close the cover
CUTTER JACK
LABEL DISPENSER JACK
COVER OF THE MODULE CONNECTION JACKS
JACK
CONNECTOR OF THE CONNECTION CABLE
COVER OF THE MODULE CONNECTION JACKS
58
Advertisement
Table of Contents
