Table of Contents
Advertisement
5
Accessories
2.
Place label dispenser to align both holes of screw and then tighten the screws. (Screw holes on the front side
of the bottom barcode Printer)
3.
Place the platen back to the printer and lock the clips.
4.
Close the printer cover and printing mechanism.
Then to turn the printer upside down.
2
Close the printer cover
Screw Hole
1
Push
RELEASE CATCH
Release catch for closing
the printer cover
51
1
Open the front
2
Tighten the screw
Lock the clip
CLIP
cover
2
Advertisement
Table of Contents
