Vanity Panel; Removal; Installation; Replacing Vanity Panel - Polaroid Digital Microscope Camera Repair Manual

DMC Repair Manual Parts Replacement
Vanity Panel (Figure 2-10)

Removal

1. Remove the four (4) screws that secures the front panel to the top and bottom extrusion.
2. Gently pull out the front panel just far enough not to disconnect the CCD and shutter flex.
3. Slide out the vanity panel from the channel in the top extrusion.
Decal

Vanity Panel

Top Extrusion
Bottom Extrusion
Front Panel
Figure 2-10. Replacing vanity panel

Installation

1. Slide the replacement vanity panel into the channel in the top extrusion.
2. Install and tighten the four (4) screws that secures the front panel to the top and bottom
extrusion being careful not to damage or crimp the CCD and shutter flex.
3. Secure the decal to the indent on the vanity panel. Place it close to the rear panel.
34