Using The Camera; Check The Control Panel; Load The Film; Position Your Subject - Polaroid Spectra 2 User Manual

Polaroid film camera user guide spectra 2
Table of Contents

Advertisement

4
Open the camera
1
(pictures 3, 4)
2
Check the
control panel
3
Load the film
(pictures 5, 6)
4
Position your
subject

Using the camera

Place both hands under the camera as shown. Slide the
release latch back. The camera will open automatically.
To close the camera (picture 4): When you have finished
using the camera, close it to protect the lens. Hold the
camera as shown. Slide the release latch back. Push both
sides of the cover down until it locks.
When you want the camera to be
all the switches are in a row as shown in picture 2.
When the switches are not in the automatic mode,
Note:
there is a red mark (or green symbol for the self-timer) vis-
ible on the panel.
Use only Polaroid Spectra color film. Other Polaroid films
cannot be used with this camera.
Push the film door release
Hold the film pack by its edges only and slide it all the way
into the camera.
You can take the most pleasing pictures of people,
indoors and outdoors,
1.5m) away.
Indoors:
Your subject should be within the
flash range. For best results, your subject should
to 4.6m)
also be near a light-colored background.
Outdoors:
Your subject should be at least
from the camera.
fully automatic
. The film door will open.
down
when they are
3 to 5 feet (0.9m to
2 feet (0.6m)
, be sure
both
2 to 15 foot (0.6m
away

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents