Chapter 3 System Configuration; Introduction; Windows Operating System; 2.4 Ghz Network Configuration - LXE MX5X Reference Manual

Introduction

There are several different aspects to the setup and configuration of the mobile device. Many of
the setup and configuration settings are dependent upon the optional features such as hardware and
software installed on the unit. The examples found in this chapter are to be used as examples only,
as the configuration of your specific mobile device may vary. The following sections provide a
general reference for the configuration of the mobile device and some of it's optional features.
Your MX5X operating system may be Windows CE .NET 4.2 or Windows CE 5.0. The MX5X
operating system is displayed on the Desktop as Windows CE .NET or Windows CE. This is the
factory default value for the Desktop Display Background.
This chapter presents information and procedures that are common to both CE versions unless
otherwise noted.

Windows Operating System

This chapter's contents assumes the system administrator is familiar with Microsoft Windows
options and capabilities loaded on most standard Windows 2000 (or later) desktop computers.
Therefore, the sections that follow describe only those Windows capabilities that are unique to the
MX5X and it's Windows CE environment.

2.4 GHz Network Configuration

All 2.4GHz network configuration is included in Chapter 5 – Wireless Network Configuration.

Installed Software

Note:
When you order a mobile device you receive the software files required by the separate programs
needed for operation and wireless communication. The files are loaded by LXE and stored in
folders in the mobile device. This section lists the contents of the folders and the general function
of the files. Files installed in the mobile device are specific to the intended function of the mobile
device.
Files installed in each mobile device configured for a wireless network environment contain
wireless client specific drivers – the drivers for each type of client are specific to the manufacturer
(e.g. Cisco, Symbol, Summit) for the clients installed in the RF environment and are not
interchangeable.
E-EQ-MX5CERG-D

Chapter 3 System Configuration

For general use instruction, please refer to commercially available Windows CE
.NET 4.2 user's guides or Windows CE 5.0 user's guides or the Windows on-line
Help application installed in the mobile device.
Some standard Windows options require an external modem connection. Modems are not
available from LXE nor supported by LXE.
MX5X Reference Guide