[Digital Link Menu]; [Art-Net Setup]; [Art-Net Channel Setting] - Panasonic PT-DZ21K2 Operating Instructions Manual

[DIGITAL LINK MENU]

When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected
to the <DIGITAL LINK/LAN> terminal, the main menu of DIGITAL LINK output supported device is displayed.
Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.
Note
f [DIGITAL LINK MENU] cannot be selected when [EXTRON XTP] is set to [ON].
f The operation guidance for the "RETURN" button is in the menu screen of the Digital Interface Box and DIGITAL LINK Switcher. The
projector does not have the "RETURN" button, but the same operation is available with the <MENU> button.

[Art-Net SETUP]

Make settings to use the Art-Net function.
1) Press as to select [Art-Net SETUP].
2) Press qw to select an item.
f The items will switch each time you press the button.
[OFF]
[ON(2.X.X.X)]
[ON(10.X.X.X)]
[ON(MANUAL)]
f When other than [OFF] is selected, proceed to Step 3).
3) Press the <ENTER> button.
f The [Art-Net SETUP] screen is displayed.
4) Press as to select the item, and pressqw to switch the setting.
[NET]
[SUB NET]
[UNIVERSE]
[START ADDRESS]
5) Press as to select [STORE], and press the <ENTER> button.
6) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.

[Art-Net CHANNEL SETTING]

Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to "Using Art-Net
function" (x page 195).
1) Press as to select [Art-Net CHANNEL SETTING].
2) Press qw to switch the item.
[2]
[USER]
[1]
f When [2] or [1] is selected, pressing the <ENTER> button displays the function assigned to the channel.
f When [USER] is selected, proceed to Step 3).
3) Press the <ENTER> button.
f The [Art-Net CHANNEL SETTING] screen is displayed.
4) Press as to select the channel to set, and pressqw to switch the item.
Chapter 4 Settings — [NETWORK] menu
Disables the Art-Net function.
Enables the Art-Net function and sets the IP address to 2.X.X.X.
Enables the Art-Net function and sets the IP address to 10.X.X.X.
Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].
Enter [NET] to be used when the projector processes Art-Net.
Enter [SUB NET] to be used when the projector processes Art-Net.
Enter [UNIVERSE] to be used when the projector processes Art-Net.
Enter [START ADDRESS] to be used when the projector processes Art-Net.
Uses the channel assignment in standard setting.
Changes the channel assignment.
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
ENGLISH - 157