Control Commands Via Lan - Panasonic PT-DZ21K2 Operating Instructions Manual

Control details
RASTER PATTERN
ENABLE/DISABLE
Note
f If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector using
the Art-Net function, the setting of the DMX controller or computer application may be different from the projector status. To reflect the
controls of all channels to the projector, set "ENABLE/DISABLE" of channel 11 to "Disable" and then set back to "Enable".
f To create/register the USER LOGO image, use "Logo Transfer Software" included in the supplied CD-ROM.

Control commands via LAN

When web control administrator rights password is set (Protect mode)
Connecting
1) Obtain the IP address and port number (Initial set value = 1024) of the projector and request a
connection to the projector.
f You can obtain both the IP address and the port number from the menu screen of the projector.
IP address
Port number
2) Check the response from the projector.
Data section
Command "NTCONTROL"
example (ASCII string)
Data length
f Mode: 1 = Protect mode
f Example: Response during protect mode (random number section is undefined value)
"NTCONTROL 1 23181e1e" (CR)
3) Generate a 32-byte hash value from the following data using MD5 algorithm.
f "xxxxxx:yyyyy:zzzzzzzz"
xxxxxx
yyyyy
zzzzzzzz
198 - ENGLISH
Chapter 6 Appendix — Technical information
Performance
No operation
OFF
WHITE
YELLOW
CYAN
GREEN
MAGENTA
RED
BLUE
BLACK
USER LOGO
No operation
Disable
Enable
Obtain from the [NETWORK] menu → [NETWORK STATUS].
Obtain from the [NETWORK] menu → [NETWORK CONTROL] → [COMMAND PORT].
Blank
' '
0x20
9 bytes 1 byte
Administrator rights user name for the web control (default user name is "admin1")
Password of above administrator rights user (default password is "panasonic")
8-byte random number obtained in Step 2)
Parameter Default value
0-15
16-31
32-47
48-63
64-79
80-95
96-111
112-127
128-143
144-159
160-175
176-255
0-127
128-255
Mode Blank Random number section
'1' ' '
0x31 0x20 (ASCII code hex number)
1 byte 1 byte
Remark
0 ―
When "Disable" is set, operations
0 of all channels become
unacceptable.
Termination
"zzzzzzzz"
8 bytes
symbol
(CR)
0x0d
1 byte