Panasonic PT-DZ21K2 Operating Instructions Manual page 218

r Terminal
<RGB 1 IN> terminal
<RGB 2 IN> terminal
<DVI-D IN> terminal
<HDMI IN> terminal
<SDI IN 1> terminal (Only for
PT-DZ21K2, PT-DS20K2)
<SDI IN> terminal (Only for
PT-DZ16K2)
<SDI IN 2> terminal
(Only for PT-DZ21K2,
PT-DS20K2)
<3D SYNC 1 IN/OUT> terminal
(Only for PT-DZ21K2,
PT-DS20K2)
<3D SYNC 2 OUT> terminal
(Only for PT-DZ21K2,
PT-DS20K2)
<SERIAL IN>/ <SERIAL OUT>
terminal
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
<REMOTE 2 IN> terminal
<DIGITAL LINK/LAN> terminal
*1 Only for PT-DZ21K2, PT-DS20K2
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
218 - ENGLISH
Chapter 6 Appendix — Specifications
1 set (BNC x 5 (RGB/YP P /YC
B R
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
Y/C signal Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
VIDEO signal 1.0 V [p-p] 75 Ω
1 set, high-density D-Sub 15 p (female)
RGB signal 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
VD
YP P signal Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
1 set (BNC)
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI
SMPTE ST 372 compliant
(LINK-A) signal
*1
Dual link 3G-SDI (Link
SMPTE ST 425 compliant
1) signal
*1
1 set (BNC)
SD-SDI signal SMPTE ST 259 compliant
HD-SDI signal SMPTE ST 292 compliant
3G-SDI signal SMPTE ST 424 compliant
Dual link HD-SDI
SMPTE ST 372 compliant
(LINK-B) signal
Dual link 3G-SDI (Link
SMPTE ST 425 compliant
2) signal
1 set (BNC)
During input setting TTL high impedance
During output setting TTL output: Maximum 10 mA
1 set (BNC)
TTL output: Maximum 10 mA
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
1 set, D-Sub 9 p, for contact control
1 set, RJ-45, for network and DIGITAL LINK connections, PJLink compatible, 100Base-TX, Art-Net
compatible
C /YC/VIDEO x 1))
B R
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
TTL high impedance, automatic positive/negative
polarity compatible
P : 0.7 V [p-p] 75 Ω
B R
P : 0.7 V [p-p] 75 Ω
B R