Panasonic PT-DZ21K2 Operating Instructions Manual page 211

Resolution
Compatible signal
1 920 x 1 200
1920 x 1200 1 920 x 1 200
1 920 x 1 200
*1 Signals with a l in the Plug and play columns are signals described in EDID (extended display identification data) of the projector. If a signal has no
l in the Plug and play columns but has an entry in the Format column, it can be input. For signals without a l in the Plug and play columns, there
are instances when resolution cannot be selected on the computer even though the projector supports them.
*2 Only for single link connection
*3 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*4 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*5 Dual link 3G-SDI is supported for PT-DZ21K2 and PT-DS20K2.
*6 Only for PT-DZ16K2
*7 Only for PT-DZ21K2, PT-DS20K2
*8 Dual link HD-SDI is supported.
*9 Dual link 3G-SDI is supported.
*10 For PT-DZ21K2, PT-DS20K2, when [3D INPUT FORMAT] is set to [AUTO], it is displayed as a 3D image in frame sequential format. To display
images in 2D, set [3D INPUT FORMAT] to [NATIVE].
*11 VESA CVT-RB (Reduced Blanking)-compliant
*12 Only for PT-DW17K2
*13 Samples the pixels in the image processing circuit and projects the image.
*14 Only for PT-DZ21K2
Note
f A signal with a different resolution is converted to the number of display dots. The number of display dots is as follows.
g PT-DZ21K2: 1 920 x 1 200
g PT-DS20K2: 1 400 x 1 050
g PT-DW17K2: 1 366 x 768
g PT-DZ16K2: 1 920 x 1 080
f The "i" at the end of the resolution indicates an interlaced signal.
f When interlaced signals are connected, flickering may occur on the projected image.
f DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
List of simultaneous input 2D compatible signals
The following table specifies the simultaneous input (2D) compatible video signals that the projector can project.
Resolution
2D compatible signal
1080/50p 1 920 x 1 080
1080/60p 1 920 x 1 080
1 366 x 768
1366 x 768
1 366 x 768
1 400 x 1 050
1400 x 1050
1 400 x 1 050
1 920 x 1 080
1920 x 1080
1 920 x 1 080
1 920 x 1 200
1920 x 1200
1 920 x 1 200
*1 Only for PT-DZ21K2, PT-DS20K2
Chapter 6 Appendix — Technical information
Scanning freq.
Horizontal Vertical
(Dots)
(kHz) (Hz)
61.8 49.9
74.0 60.0
*11
74.6 59.9
*13
Scanning freq.
Horizontal Vertical
(Dots)
(kHz) (Hz)
56.3 50.0
67.5 60.0
39.6 49.9
47.7 59.8
54.1 50.0
65.3 60.0
55.6 49.9
66.6 59.9
61.8 49.9
74.0 60.0
Dot clock
freq. Format
(MHz)
158.3 R/D/H
154.0 R/D/H
193.3 R
Dot clock freq.
HDMI/DVI
(MHz)
148.5
148.5
69.0
85.5
99.9
121.8
141.5
138.5
158.3
154.0
Plug and play
*1
DVI-D
RGB2
EDID1 EDID2 EDID3
― ― ― ―
―
l l l *14
― ― ― ―
SDI1/SDI2
l l
l l
―
l
―
l
―
l
―
l
―
l
―
l
―
l
―
l
ENGLISH - 211
HDMI
―
l *14
―
*1