Table of Contents
Advertisement
When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set to [OFF]
The screen shows the status of the brightness control in one projector.
When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [AUTO] and [LINK] is set from [GROUP A] to
[GROUP D]
The screen shows the status of the brightness control of synchronized projectors (up to eight units), including the
projector being controlled through the on-screen menu.
When [MODE] of [BRIGHTNESS CONTROL SETUP] is set to [PC]
1
Display the name of the projector.
2
Display the synchronized group.
3
Display the IP address of the projector.
4
Display the names and IP addresses of projectors in same group detected over the network.
5
Display the status by color.
Green: There is an allowance for brightness correction.
Yellow: There is little allowance for brightness correction.
Red: There is a brightness control error.
6
Display error detailed messages.
7
Display error messages.
When the message [Failed to apply BRIGHTNESS CONTROL to some projectors.] appears, it means that synchronization with the
projector displayed in red has failed.
Press as to select the projector displayed in red, and press the <ENTER> button to display the error details.
8
Update to the latest status information.
Chapter 4 Settings — [PROJECTOR SETUP] menu
BRIGHTNESS CONTROL STATUS
LINK
PROJECTOR
RETURN
MENU
BRIGHTNESS CONTROL STATUS
LINK
PROJECTOR
1:
PROJECTOR2
2:
PROJECTOR3
3:
4:
5:
6:
7:
UPDATE
MENU SELECT
BRIGHTNESS CONTROL STATUS
MODE
PROJECTOR
RETURN
MENU
OFF
5
1
6
1
GROUP A
2
3
192. 168. 30. 2
192. 168. 30. 3
192. 168. 30. 4
4
5
7
8
PC
5
1
6
ENGLISH - 131
- Quick Links:
- [Art-Net Setup]
Hide quick links:
Advertisement
Table of Contents
