Customizing The Display - Leica MX400 Operating Instructions Manual

Plot

Customizing The Display

There are a number of display options available, press the E key to
modify the screen to your needs.
Press the Display Options softkey.
The following choices are available:
Show Boat - Yes is the default condition, which places the boat
icon in the middle of the screen. No places the boat in a Com-
pass Rose in the upper right corner of the screen (see the
diagram below), where your direction is indicated by the boat in
the Compass Rose. The boats position is then indicated by an X
in the center of the screen.
Show All Waypoints - Yes is the default condition, which
displays all waypoints, where the first character of the descrip-
tion is a symbol, in its proper location relative to the boats
position. No causes none of the waypoints to be displayed.
Show Active Route - Yes is the default condition, which causes
the active route (course lines) and its waypoint symbols to be
Version 3.3
RTE1 Was:
WPT 21
Waypoints Added
WPT 22
By GOTO Function:
WPT 23
WPT 24
WPT 1996
WPT25
WPT 35
WPT 26
WPT 27
Operator's Manual
RTE1 Is
Changed To
WPT 21
WPT 22
WPT 23
WPT 24
WPT 1996
WPT 35
WPT 25
WPT 26
WPT 27
79